DG611AEN-T1-E4

55ns, 35ns SPST - NC 115Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG611 16 Pins 100pA 3V 16-WFQFN

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG611AEN-T1-E4
Package: 16-WFQFN
Datasheet: PDF
Stock: 496
Description: 55ns, 35ns SPST - NC 115Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG611 16 Pins 100pA 3V 16-WFQFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WFQFN
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2014
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	72Ohm
Additional Feature	ALSO OPERATE WITH 5V AND 3V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	525mW
Terminal Position	QUAD
Number of Functions	4
Supply Voltage	3V
Base Part Number	DG611
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Power Dissipation	525mW
Max Supply Current	100μA
Throw Configuration	SPST
Turn On Delay Time	55 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	720MHz
On-State Resistance (Max)	115Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 3pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	55ns, 35ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Switch-off Time-Max	50ns
Normal Position	NC
Height	750μm
Length	2.6mm
Width	1.8mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG611AEN-T1-E4 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-WFQFN. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. In total, 16 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. There is an electrical component included in the 16 series. These analog multiplexers are built based on SPST - NC switching circuits. Search with DG611 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 72Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 2.7V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 1μA current. If put voltage greater than 100μA on the device, damage may be caused to the analogue multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. If you are using a dual power supply, you should attach at least 2.7V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. The 4 inputs need to be operated in order to work. Check out the electrical component's additional features, such as the following: ALSO OPERATE WITH 5V AND 3V SUPPLY.