DG611DJ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 45Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Number of Functions | 4 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | 515-3V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 10V |
| Power Dissipation | 470mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 10V~18V ±10V~15V |
| Supply Type | Dual, Single |
| Bandwidth | 500MHz |
| Turn-Off Delay Time | 25 ns |
| Max Dual Supply Voltage | 15V |
| On-State Resistance (Max) | 45Ohm |
| Min Dual Supply Voltage | 10V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 2pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 35ns, 25ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -87dB @ 5MHz |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 45Ohm |
| Normal Position | NC |
| Height | 3.81mm |
| Length | 21.33mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG611DJ Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Through Hole. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~85°C TA extended. 16 terminations have been made so far. As part of the design of the 16 series, this electronic part has been incorporated into the system. A SPST - NC switching circuit is used for these analog switches. In this multiplexer, the internal resistance is 45Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 18V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. 10V is the lowest voltage the electrical component should receive. A voltage higher than 1μA may cause damage to the switch multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 15V. It is recommended that you attach at least 10V to your dual power supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electrical component supports 4 inputs. There are 500MHz bandwidths for data transfer. There is 45Ohm Drain to Source resistance on this electronic part.
DG611DJ Features
Switch Circuit: SPST - NC
Bandwidth: 500MHz
Drain-to-Source resistance: 45Ohm
DG611DJ Applications
There are a lot of Vishay Siliconix DG611DJ Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- PCMCIA cards
- MP3 players
- Multi-Line E1 Interface Cards
- Cable PC
- Communication systems
- Digital Cross-Connects
- Private Branch Exchange (PBX)
- DSUs
- CSU
