DG611DJ-E3

35ns, 25ns SPST - NC 45Ohm Analog Switches BREAK-BEFORE-MAKE DG611 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG611DJ-E3
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 801
Description: 35ns, 25ns SPST - NC 45Ohm Analog Switches BREAK-BEFORE-MAKE DG611 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Switch Time (Ton, Toff) (Max)	35ns, 25ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-87dB @ 5MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	50ns
Normal Position	NC
Height	3.81mm
Length	21.33mm
Width	7.11mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	45Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	NMOS
Number of Functions	4
Supply Voltage	15V
Base Part Number	DG611
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	515-3V
Number of Channels	1
Max Supply Voltage	18V
Min Supply Voltage	10V
Operating Supply Current	-1μA
Power Dissipation	470mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	35 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	10V~18V ±10V~15V
Supply Type	Dual, Single
Bandwidth	500MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	25 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	10V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	74 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	3pF 2pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NC

DG611DJ-E3 Overview

Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. In total, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SPST - NC switching circuits, these analog multiplexers work. Search with DG611 if you are looking for analog multiplexer variants. There is 45Ohm internal resistance in this digital multiplexer. The datasheets for the 16 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 18V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 10V as the lowest voltage for the electrical part. -1μA current would be enough for this multiplexer to operate. Putting voltage greater than 1μA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 15V. With dual power supplies, you should attach at least 10V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. The electrical component supports 4 inputs. In 500MHz-bandwidths, data can be transferred. Don't miss this electronic component's additional features, such as: VIDEO APPLICATION.