DG612AEN-T1-E4

55ns, 35ns SPST - NO 115Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG612 16 Pins 100pA 3V 16-WFQFN

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG612AEN-T1-E4
Package: 16-WFQFN
Datasheet: PDF
Stock: 381
Description: 55ns, 35ns SPST - NO 115Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG612 16 Pins 100pA 3V 16-WFQFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WFQFN
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2016
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	72Ohm
Additional Feature	ALSO OPERATE WITH 5V AND 3V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	525mW
Terminal Position	QUAD
Number of Functions	4
Supply Voltage	3V
Base Part Number	DG612
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Power Dissipation	525mW
Max Supply Current	100μA
Throw Configuration	SPST
Turn On Delay Time	55 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	720MHz
On-State Resistance (Max)	115Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 3pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	55ns, 35ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Switch-off Time-Max	50ns
Normal Position	NO
Height	750μm
Length	2.6mm
Width	1.8mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG612AEN-T1-E4 Overview

As the electronic part is packed in 16-WFQFN, international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, 16 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. The analog switch ics are built using SPST - NO switching circuits. Use DG612 to search for variants of the digital switches. In this multiplexer, the internal resistance is 72Ohm. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 12V to a switch device. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2.7V. For this multiplexer to operate, 1μA current would be sufficient. When the digital multiplexer is charged above 100μA, damage can occur. There is no problem with using dual supply voltage, but it should not exceed 5V. If you are using dual power supplies, you should attach at least 2.7V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. There are 4 inputs to be operated. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATE WITH 5V AND 3V SUPPLY.