DG612DJ-E3
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Weight | 1.627801g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 45Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 470mW |
| Base Part Number | DG612 |
| Number of Outputs | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 10V |
| Operating Supply Current | -1μA |
| Power Dissipation | 470mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 50 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 10V~18V ±10V~15V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 35 ns |
| Max Dual Supply Voltage | 15V |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 45Ohm |
| Min Dual Supply Voltage | 10V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 2pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 35ns, 25ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 2Ohm |
| Crosstalk | -87dB @ 5MHz |
| Height | 3.81mm |
| Length | 21.33mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG612DJ-E3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. It is mounted in the position Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around -40°C~85°C TA are extended for operation. A electrical component with 4 channels is capable of high-quality output. On the other hand, analog switches can be constructed using SPST - NO switching circuits. 4 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with DG612 if you are looking for variants. In this multiplexer, the internal resistance is 45Ohm. The datasheets for the 16 pins explain the functions. normally, users should not supply switches with voltages higher than 18V. Digital switch that provides Dual, Single power at a cost-effective price. 10V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of -1μA. Putting voltage greater than 1μA on the multiplexer may cause damage. If put voltage greater than 15V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 10V. The electrical component supports 4 inputs. During operation, the multiplexer should not be exposed to a temperature above 85°C. The analogue multiplexer has 4 outputs. Suppliers offer 16-PDIP packages.
DG612DJ-E3 Features
4 Channels
Switch Circuit: SPST - NO
-1μA Supply Current
-3db Bandwidth: 500MHz
DG612DJ-E3 Applications
There are a lot of Vishay Siliconix DG612DJ-E3 Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Transmit
- Digital Cross-Connects
- CSU
- RGB switches
- Industrial and process control systems
- Communication systems
- SDH/SONET multiplexers
- Data Acquisition Systems
- SONET
