Parameters |
Base Part Number |
DG612 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Power Supplies |
515-3V |
Number of Channels |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
10V |
Operating Supply Current |
-1μA |
Nominal Supply Current |
5nA |
Power Dissipation |
600mW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
50 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
10V~18V ±10V~15V |
Supply Type |
Dual, Single |
Bandwidth |
500MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
35 ns |
Max Dual Supply Voltage |
15V |
On-State Resistance (Max) |
45Ohm |
Min Dual Supply Voltage |
10V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
74 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
3pF 2pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
35ns, 25ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Crosstalk |
-87dB @ 5MHz |
Switching |
BREAK-BEFORE-MAKE |
Drain to Source Resistance |
45Ohm |
Normal Position |
NO |
Height |
1.55mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
665.986997mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2016 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
45Ohm |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
VIDEO APPLICATION |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
600mW |
Technology |
NMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
DG612DY-E3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. There is an electrical component included in the 16 series. Based on SPST - NO switching circuits, these analog multiplexers work. Search with DG612 if you are looking for analog multiplexer variants. An switch multiplexer with 45Ohm internal resistance has a value of 45Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 18V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended to use 10V as the lowest voltage for the electrical part. This multiplexer would work with -1μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There is no problem with using dual supply voltage, but it should not exceed 15V. It is recommended that you attach at least 10V to your dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. There are 4 inputs to be operated. 500MHz bandwidths enable data to be transferred. This electrical component also includes additional features such as VIDEO APPLICATION. A Drain to Source resistance of 45Ohm is shown for this electronic part.
DG612DY-E3 Features
1 Channels
Switch Circuit: SPST - NO
-1μA Supply Current
Bandwidth: 500MHz
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 45Ohm
DG612DY-E3 Applications
There are a lot of Vishay Siliconix DG612DY-E3 Analog Switches & Multiplexers ICs applications.
- Modems
- Communication systems
- Channel Banks
- Cellular phones
- MP3 players
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Fiber to the Home
- PBXs
- Industrial and process control systems
- FTTH