DG612DY-T1-E3

35ns, 25ns SPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE DG612 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG612DY-T1-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 102
Description: 35ns, 25ns SPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE DG612 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	45Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	NMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG612
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	15-3V
Number of Channels	1
Max Supply Voltage	18V
Min Supply Voltage	10V
Operating Supply Current	-1μA
Power Dissipation	600mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	50 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	10V~18V ±10V~15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	15V
-3db Bandwidth	500MHz
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	10V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	74 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	3pF 2pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	35ns, 25ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-87dB @ 5MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG612DY-T1-E3 Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 16 terminations. A electrical component with 1 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. This electrical component is included in the 16 series of products. Unlike digital switches, these are based on SPST - NO switching circuits. Use DG612 to search for variants of the digital switches. As far as internal resistance is concerned, it has 45Ohm. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 18V in normal situations. A cost-effective Dual, Single supply type analogue multiplexer. A low voltage of 10V should be applied to the electronic component. This multiplexer would work with -1μA current. It may damage the digital multiplexer if the voltage is higher than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 15V. A dual power supply should have at least 10V voltage attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating the 4 inputs requires 4 inputs. Don't miss this electronic component's additional features, such as: VIDEO APPLICATION.