DG613AEY-T1-E3

55ns, 35ns SPST - NO/NC 115Ohm Analog Switches BREAK-BEFORE-MAKE DG613 16 Pins 100pA 3V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG613AEY-T1-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 233
Description: 55ns, 35ns SPST - NO/NC 115Ohm Analog Switches BREAK-BEFORE-MAKE DG613 16 Pins 100pA 3V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	547.485991mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	72Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATE WITH 5V AND 3V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Terminal Form	GULL WING
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm
Base Part Number	DG613
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	1nA
Power Dissipation	640mW
Max Supply Current	100μA
Throw Configuration	SPST
Turn On Delay Time	55 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	720MHz
On-State Resistance (Max)	115Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 3pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	55ns, 35ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Switch-off Time-Max	50ns
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG613AEY-T1-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~125°C TA extended. Totally, there are 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NO/NC switching circuit is used for these analog switches. Try searching with DG613 to find analog multiplexer variants. There is 72Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.7V. This multiplexer would work with 1μA current. A digital multiplexer may suffer damage if voltage is applied above 100μA. Despite this switch device's dual supply capability, its voltage should not exceed 5V. A dual power supply should have at least 2.7V voltage attached. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There are 4 inputs to be operated. Additional features of the electronic component include: ALSO OPERATE WITH 5V AND 3V SUPPLY.