DG613DJ-E3

35ns, 25ns DPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG613 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG613DJ-E3
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 349
Description: 35ns, 25ns DPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG613 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	45Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	NMOS
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	15V
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	DG613
Pin Count	16
Number of Outputs	4
Qualification Status	Not Qualified
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	18V
Min Supply Voltage	10V
Analog IC - Other Type	SPST
Operating Supply Current	-1μA
Power Dissipation	470mW
Max Supply Current	1μA
Turn On Delay Time	35 ns
Voltage - Supply, Single/Dual (±)	10V~18V ±10V~15V
Supply Type	Dual, Single
Bandwidth	500MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	25 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	10V
Multiplexer/Demultiplexer Circuit	2:2
Off-state Isolation-Nom	74 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	3pF 2pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	DPDT
Switch Time (Ton, Toff) (Max)	35ns, 25ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-87dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	50ns
Drain to Source Resistance	45Ohm
Normal Position	NO/NC
Height	3.81mm
Length	21.33mm
Width	7.11mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG613DJ-E3 Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. In Through Hole, you'll find this switch device. 2:2 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. On the other hand, analog switches can be constructed using DPDT switching circuits. The circuits in this analogue multiplexer number 1. Using the DG613 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 45Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 18V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 10V. -1μA current would be enough for this multiplexer to operate. It may damage the digital multiplexer if the voltage is higher than 1μA. Despite this switch device's dual supply capability, its voltage should not exceed 15V. For dual power supplies, a voltage of at least 10V should be attached. A SPST analog IC is integrated into the board. A 500MHz-bandwidth can be used for data transfer. Additional features include: VIDEO APPLICATION. There is 45Ohm resistance between the Drain and Source on this part. There are 4 outputs on the analogue multiplexer.