DG613DY-E3

35ns, 25ns DPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG613 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG613DY-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 158
Description: 35ns, 25ns DPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG613 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	45Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	NMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG613
Pin Count	16
Number of Outputs	4
Output Type	Digital
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	18V
Min Supply Voltage	10V
Operating Supply Current	-1μA
Nominal Supply Current	5μA
Power Dissipation	600mW
Max Supply Current	1μA
Throw Configuration	DPDT, SPST
Turn On Delay Time	35 ns
Voltage - Supply, Single/Dual (±)	10V~18V ±10V~15V
Supply Type	Dual, Single
Bandwidth	500MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	25 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	10V
Dual Supply Voltage	12V
Multiplexer/Demultiplexer Circuit	2:2
Off-state Isolation-Nom	74 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	3pF 2pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	DPDT
Switch Time (Ton, Toff) (Max)	35ns, 25ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-87dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	50ns
Drain to Source Resistance	45Ohm
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG613DY-E3 Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, this analog switch is mounted. 2:2 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 16 series of products. A DPDT switching circuit is used to build these analog multiplexers. There are 1 circuits in this multiplexer. Try searching with DG613 to find analog multiplexer variants. Analog switches have 45Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 18V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Dual, Single supply type. 10V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on -1μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There is no problem with using dual supply voltage, but it should not exceed 15V. The voltage should be at least 10V if you are using dual power supplies. In 500MHz-bandwidths, data can be transferred. Additional features include: VIDEO APPLICATION. Resistivity from Drain to Source is 45Ohm for this electronic part. 4 outputs are included in the analogue multiplexer.