DG641DJ-E3

70ns, 50ns SPST - NO 15Ohm Analog Switches BREAK-BEFORE-MAKE DG641 16 Pins 10nA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG641DJ-E3
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 225
Description: 70ns, 50ns SPST - NO 15Ohm Analog Switches BREAK-BEFORE-MAKE DG641 16 Pins 10nA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Length	21.33mm
Width	7.11mm
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	15Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	15V
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	DG641
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Power Supplies	15-3V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	21V
Min Supply Voltage	10V
Analog IC - Other Type	AUDIO/VIDEO SWITCH
Operating Supply Current	3.5mA
Max Supply Current	6mA
Throw Configuration	SPST
Turn On Delay Time	70 ns
Voltage - Supply, Single/Dual (±)	3V~15V ±3V~15V
Supply Type	Dual, Single
Bandwidth	500MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	15Ohm
Min Dual Supply Voltage	10V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	70ns, 50ns
Charge Injection	19pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-87dB @ 5MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	85ns
Normal Position	NC
Height	3.81mm

DG641DJ-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. A 1 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. These analog multiplexers are built based on SPST - NO switching circuits. A total of 4 circuits make up this switch device. Try searching with DG641 to find analog multiplexer variants. An switch multiplexer with 15Ohm internal resistance has a value of 15Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 21V voltage to the switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 10V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 3.5mA. The analogue multiplexer may be damaged if voltage is greater than 6mA. There is no problem with using dual supply voltage, but it should not exceed 15V. If you are using dual power supplies, you should attach at least 10V. There is an integrated analog IC AUDIO/VIDEO SWITCH in the module. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. It can operate from 15V operating voltages. 500MHz bandwidths enable data to be transferred. Don’t miss additional features of the electronic component such as: VIDEO APPLICATION.