DG642DY
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 8Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 300mW |
| Number of Outputs | 2 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 20μA |
| Power Dissipation | 300mW |
| Max Supply Current | 6mA |
| Turn On Delay Time | 100 ns |
| Number of Inputs | 1 |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~15V |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 15V |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 8Ohm |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 12V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 20pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 100ns, 60ns |
| Charge Injection | 40pC |
| Channel-to-Channel Matching (ΔRon) | 500mOhm |
| Crosstalk | -85dB @ 5MHz |
| Drain to Source Resistance | 8Ohm |
| Height | 1.55mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG642DY Overview
Shipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. A 1 channel electronic part produces high-quality output. A SPDT switching circuit is used for these analog switches. The multiplexer consists of 1 circuits. In this multiplexer, the internal resistance is 8Ohm. The functions of 8 pins can be found in the datasheets. Multiplexers should not be powered above 18V in normal situations. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 10V should be applied to the electronic component. For this digital switch to work, 20μA current would suffice. If you put voltage higher than 6mA on the digital multiplexer, damage may occur. If put voltage greater than 15V on the multiplexer, damage may be caused to the device. You should attach at least 10V voltage if you are using dual power supply. This electrical part is compatible with 15V operating voltages. In order to operate the 1 inputs, there are several steps to follow. A 500MHz-bandwidth can be used for data transfer. An environment with a temperature greater than 85°C should not be used to operate the digital switches. There is 8Ohm Drain to Source resistance on this electronic part. This digital multiplexer has 2 outputs. Suppliers offer a 8-SOIC package.
DG642DY Features
1 Channels
Switch Circuit: SPDT
20μA Supply Current
-3db Bandwidth: 500MHz
Bandwidth: 500MHz
Drain-to-Source resistance: 8Ohm
DG642DY Applications
There are a lot of Vishay Siliconix DG642DY Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Public switching systems
- ISDN NT1/TA
- High reliability control systems
- Relay replacements
- Imaging
- Industrial control systems
- Ultrasound
- Avionics and Military Systems
- Precision test equipment
