DG643DJ-E3

70ns, 50ns SPDT 15Ohm Analog Switches BREAK-BEFORE-MAKE DG643 16 Pins 10nA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG643DJ-E3
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 514
Description: 70ns, 50ns SPDT 15Ohm Analog Switches BREAK-BEFORE-MAKE DG643 16 Pins 10nA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	15Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Number of Functions	2
Supply Voltage	15V
Base Part Number	DG643
Pin Count	16
Operating Supply Voltage	15V
Power Supplies	15-3V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	21V
Min Supply Voltage	10V
Analog IC - Other Type	AUDIO/VIDEO SWITCH
Operating Supply Current	3.5mA
Nominal Supply Current	3.5mA
Max Supply Current	6mA
Turn On Delay Time	70 ns
Voltage - Supply, Single/Dual (±)	3V~15V ±3V~15V
Supply Type	Dual, Single
Bandwidth	500MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	15Ohm
Min Dual Supply Voltage	10V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	70ns, 50ns
Charge Injection	19pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-87dB @ 5MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	140ns
Switch-off Time-Max	85ns
Height	3.81mm
Length	21.33mm
Width	7.11mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG643DJ-E3 Overview

Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Through Hole. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. These analog multiplexers are built based on SPDT switching circuits. A 2 circuit is present in this switch device. Look for analog switch ic variants by searching with DG643. Internally, this switch multiplexer has a resistance of 15Ohm. To find out what the 16 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 21V. Analog switch ics with Dual, Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 10V. In order to operate this switch device, it would need a current of 3.5mA. A voltage higher than 6mA may cause damage to the switch multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 15V. The voltage should be at least 10V if you are using dual power supplies. An analog IC with the number AUDIO/VIDEO SWITCH is integrated into this board. There is a voltage range of 15V operating voltages for the electrical part. The transfer of data can be performed over 500MHz bandwidths. Don't miss this electronic component's additional features, such as: VIDEO APPLICATION.