DG721DN-T1-GE4

30ns, 35ns SPST - NO 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 8 Pins 250pA 3V 8-UFDFN Exposed Pad

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG721DN-T1-GE4
Package: 8-UFDFN Exposed Pad
Datasheet: PDF
Stock: 304
Description: 30ns, 35ns SPST - NO 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 8 Pins 250pA 3V 8-UFDFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-UFDFN Exposed Pad
Number of Pins	8
Weight	50.008559mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2014
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	4.5Ohm
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Output	SEPARATE OUTPUT
Pin Count	8
Power Supplies	3/5V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Max Supply Current	2μA
Turn On Delay Time	30 ns
Supply Type	Single
Turn-Off Delay Time	35 ns
-3db Bandwidth	366MHz
On-State Resistance (Max)	4.5Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	47 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 9pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 35ns
Charge Injection	2.2pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	55ns
Switch-off Time-Max	40ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Normal Position	NO
Height	550μm
Length	2.05mm
Width	2.05mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	Non-RoHS Compliant

DG721DN-T1-GE4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-UFDFN Exposed Pad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 8. High-quality output is provided by the electronic component's 1 channels. A 3V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 8 series. Multiplexers built on a SPST - NO switching circuit are built. The multiplexer consists of 2 circuits. The internal resistance of this digital multiplexer is 4.5Ohm. To find out what the 8 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Single supply type digital switch with a low cost. 1.8V is the lowest voltage the electrical component should receive. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. Putting voltage greater than 2μA on the multiplexer may cause damage. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Check out the electrical component's additional features, such as the following: VIDEO APPLICATION.