DG721DQ-T1-GE3

30ns, 35ns SPST - NO 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG721 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG721DQ-T1-GE3
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 124
Description: 30ns, 35ns SPST - NO 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG721 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Inquiry Now

Details

Tags

Parameters
Height	950μm
Length	3mm
Width	3.1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Weight	139.989945mg
Operating Temperature	-40°C~85°C TA
Packaging	Digi-Reel®
Published	2009
JESD-609 Code	e4
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	4.5Ohm
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	320mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	DG721
Output	SEPARATE OUTPUT
Pin Count	8
Power Supplies	3/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	2μA
Power Dissipation	320mW
Max Supply Current	2μA
Throw Configuration	SPST
Turn On Delay Time	30 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	35 ns
-3db Bandwidth	366MHz
On-State Resistance (Max)	4.5Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	47 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 9pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 35ns
Charge Injection	2.2pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	55ns
Switch-off Time-Max	40ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Normal Position	NO

DG721DQ-T1-GE3 Overview

This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad, making it easy to ship abroad. High reliability is provided by advanced packaging method Digi-Reel?. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 8. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. An electrical component of this type can be found in the 8 series. Multiplexers built on a SPST - NO switching circuit are built. DG721 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 4.5Ohm. To find out what the functions of 8 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 5.5V in normal situations. Digital switch that provides Single power at a cost-effective price. It is recommended to use 1.8V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 2μA current. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. Putting voltage greater than 2μA on the multiplexer may cause damage. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Among the inputs that can be operated are the 2 inputs. Don't forget the additional features of this electronic part, such as: VIDEO APPLICATION.