DG722DN-T1-GE4

30ns, 35ns SPST - NC 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 8 Pins 250pA 3V 8-UFDFN Exposed Pad

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG722DN-T1-GE4
Package: 8-UFDFN Exposed Pad
Datasheet: PDF
Stock: 586
Description: 30ns, 35ns SPST - NC 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 8 Pins 250pA 3V 8-UFDFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-UFDFN Exposed Pad
Number of Pins	8
Weight	50.008559mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	4.5Ohm
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Output	SEPARATE OUTPUT
Pin Count	8
Power Supplies	3/5V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Max Supply Current	2μA
Turn On Delay Time	30 ns
Supply Type	Single
Turn-Off Delay Time	35 ns
-3db Bandwidth	366MHz
On-State Resistance (Max)	4.5Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	47 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 9pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	30ns, 35ns
Charge Injection	2.2pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	55ns
Switch-off Time-Max	40ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Normal Position	NC
Height	550μm
Length	2.05mm
Width	2.05mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant

DG722DN-T1-GE4 Overview

Due to its 8-UFDFN Exposed Pad packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~85°C TA. There are 8 terminations totally. The electronic part provides high-quality output because it has 1 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 8 series. Multiplexers built on a SPST - NC switching circuit are built. It consists of 2 circuits. This digital multiplexer has 4.5Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Single supply type. 1.8V is the lowest voltage that should be fed to the electronic electronic part. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. A voltage higher than 2μA may cause damage to the switch multiplexer. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Additional features include: VIDEO APPLICATION.