DG722DQ-T1-GE3

30ns, 35ns SPST - NC 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG722 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG722DQ-T1-GE3
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 336
Description: 30ns, 35ns SPST - NC 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG722 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Weight	139.989945mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	4.5Ohm
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	320mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	DG722
Output	SEPARATE OUTPUT
Pin Count	8
Power Supplies	3/5V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	2μA
Max Supply Current	2μA
Throw Configuration	SPST
Turn On Delay Time	30 ns
Supply Type	Single
Turn-Off Delay Time	35 ns
-3db Bandwidth	366MHz
On-State Resistance (Max)	4.5Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	47 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 9pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	30ns, 35ns
Charge Injection	2.2pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	55ns
Switch-off Time-Max	40ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Normal Position	NC
Height	950μm
Length	3mm
Width	3.1mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

DG722DQ-T1-GE3 Overview

Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 8. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. An electrical component like this is included in the 8 series. A SPST - NC switching circuit is used for these analog switches. Circuits number 2 make up this analogue multiplexer. Using the DG722 search parameter, you can discover variants of the switch. This digital multiplexer has 4.5Ohm internal resistance. For functions related to 8 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. The analog switch ic is of the Single supply type and is cost-effective. 1.8V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 2μA. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 2μA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. There is also VIDEO APPLICATION to look out for in this electronic part.