DG723DN-T1-GE4

30ns, 35ns SPST - NO/NC 4.5Ohm Analog Switches 250pA 8-UFDFN Exposed Pad

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG723DN-T1-GE4
Package: 8-UFDFN Exposed Pad
Datasheet: PDF
Stock: 466
Description: 30ns, 35ns SPST - NO/NC 4.5Ohm Analog Switches 250pA 8-UFDFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-UFDFN Exposed Pad
Number of Pins	8
Supplier Device Package	8-TDFN (2x2)
Weight	50.008559mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	4.5Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	842mW
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Nominal Supply Current	1μA
Max Supply Current	2μA
Throw Configuration	SPST
Turn On Delay Time	30 ns
Supply Type	Single
Turn-Off Delay Time	35 ns
-3db Bandwidth	366MHz
On-State Resistance (Max)	4.5Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 9pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	30ns, 35ns
Charge Injection	2.2pC
Channel-to-Channel Matching (ΔRon)	200mOhm
Crosstalk	-90dB @ 10MHz
Voltage - Supply, Single (V+)	1.8V~5.5V
Height	550μm
Length	2.05mm
Width	2.05mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Lead Free

DG723DN-T1-GE4 Overview

Shipping overseas is convenient due to the electrical component's packing in 8-UFDFN Exposed Pad. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. This electronic part offers high-quality output due to its 2 channels. The analog switch ics are built using SPST - NO/NC switching circuits. The multiplexer consists of 2 circuits. In this multiplexer, the internal resistance is 4.5Ohm. Datasheets for functions of 8 pins are available. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. An effective Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 1.8V. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 2μA. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer. Suppliers offer a package with 8-TDFN (2x2).