Parameters |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Number of Pins |
8 |
Weight |
139.989945mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Digi-Reel® |
Published |
2010 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
4.5Ohm |
Additional Feature |
VIDEO APPLICATION |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
320mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
DG723 |
Pin Count |
8 |
Polarity |
Non-Inverting |
Power Supplies |
3/5V |
Number of Channels |
1 |
Number of Circuits |
2 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
2μA |
Nominal Supply Current |
2μA |
Max Supply Current |
2μA |
Throw Configuration |
SPST |
Turn On Delay Time |
30 ns |
Supply Type |
Single |
Turn-Off Delay Time |
35 ns |
-3db Bandwidth |
366MHz |
On-State Resistance (Max) |
4.5Ohm |
High Level Output Current |
50mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
47 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
8pF 9pF |
On-state Resistance Match-Nom |
0.3Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
30ns, 35ns |
Charge Injection |
2.2pC |
Channel-to-Channel Matching (ΔRon) |
200m Ω |
Crosstalk |
-90dB @ 10MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
55ns |
Switch-off Time-Max |
40ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Height |
950μm |
Length |
3mm |
Width |
3.1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DG723DQ-T1-GE3 Overview
Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad, the electronic component is convenient for shipping overseas. The advanced packaging method Digi-Reel? provides high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 8 terminations. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. 8 pins are injected to the electronic part body. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. This multiplexer is composed of 2 circuits. Search with DG723 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 4.5Ohm. To find out what the 8 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 5.5V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 1.8V. This multiplexer would work with 2μA current. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 2μA. There is also VIDEO APPLICATION to look out for in this electronic part.
DG723DQ-T1-GE3 Features
1 Channels
Switch Circuit: SPST - NO/NC
2μA Supply Current
-3db Bandwidth: 366MHz
Additional Features: VIDEO APPLICATION
DG723DQ-T1-GE3 Applications
There are a lot of Vishay Siliconix DG723DQ-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Remote Powered Equipment
- Automotive applications
- HDTV
- RGB switches
- Channelized and Unchannelized DS3 applications
- Isolation
- High speed data transmission line cards
- Relay Replacement
- Wireless Local Loop