DG9051DQ-T1-E3

35ns, 30ns 40Ohm Analog Switches DG9051 16 Pins 1nA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG9051DQ-T1-E3
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 689
Description: 35ns, 30ns 40Ohm Analog Switches DG9051 16 Pins 1nA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Power Dissipation	925mW
Max Supply Current	1μA
Propagation Delay	80 ns
Turn On Delay Time	90 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	30 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	40Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	79 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	4pF 8pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	35ns, 30ns
Charge Injection	38pC
Channel-to-Channel Matching (ΔRon)	5 Ω (Max)
Crosstalk	-83dB @ 1MHz
Switch-on Time-Max	70ns
Switch-off Time-Max	50ns
Drain to Source Resistance	30Ohm
Height	920μm
Length	5.07mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2017
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Termination	SMD/SMT
Resistance	500mOhm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	925mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG9051
Pin Count	16
Operating Supply Voltage	3V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	1μA

DG9051DQ-T1-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 16 terminations. By its 8 channels, the electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. 16 pins are injected to the electronic part body. There are 1 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with DG9051. There is 500mOhm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2.7V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 1μA. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. If you are using dual power supplies, you should attach at least 2.7V. A voltage of 3V can be used to operate the electronic component. There is 30Ohm resistance between the Drain and Source on this part.