Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
540.001716mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
30Ohm |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
400mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Reach Compliance Code |
unknown |
Output |
SEPARATE OUTPUT |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Power Supplies |
3/5V |
Max Supply Voltage |
12V |
Min Supply Voltage |
2.7V |
Power Dissipation |
400mW |
Max Supply Current |
1μA |
Turn On Delay Time |
75 ns |
Number of Inputs |
2 |
Supply Type |
Single |
Turn-Off Delay Time |
50 ns |
On-State Resistance (Max) |
30Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
7pF 13pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
75ns, 50ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
400m Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
2.7V~12V |
Drain to Source Resistance |
30Ohm |
Normal Position |
NO |
Height |
1.55mm |
Length |
5mm |
Width |
4mm |
RoHS Status |
Non-RoHS Compliant |
DG9232DY Overview
Shipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. 8 terminations have been made so far. It is injected into the electrical part body with 8 pins. Unlike digital switches, these are based on SPST - NC switching circuits. There is 30Ohm internal resistance in this digital multiplexer. The datasheets for the 8 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2.7V. This analog switch requires a voltage of 2.7V~12V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electrical component supports 2 inputs. This electronic component presents a Drain to Source resistance of 30Ohm.
DG9232DY Features
Switch Circuit: SPST - NC
Drain-to-Source resistance: 30Ohm
DG9232DY Applications
There are a lot of Vishay Siliconix DG9232DY Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Wireless Local Loop
- Audio and video routing
- Cable PC
- 65 V DACs
- Digital Cross-Connects
- Precision data acquisition
- SDH/SONET multiplexers
- Modems
- Power routing