DG9251EN-T1-E4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 482Ohm |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG9251 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 50μA |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 314MHz |
| On-State Resistance (Max) | 182Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 45 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.7pF 10.7pF |
| On-state Resistance Match-Nom | 3.1Ohm |
| Switch Time (Ton, Toff) (Max) | 250ns, 125ns |
| Charge Injection | 4.1pC |
| Channel-to-Channel Matching (ΔRon) | 3.1 Ω |
| Crosstalk | -67dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 369ns |
| Signal Current-Max | 0.03A |
| Length | 2.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG9251EN-T1-E4 Overview
Due to its 16-WFQFN packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. There is 8:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~125°C TA. There are 16 terminations totally. By its 8 channels, the electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. This electrical component is included in the 16 series of products. It consists of 1 circuits. Use DG9251 to search for variants of the digital switches. Analog switches have 482Ohm internal resistance. Users shouldn't supply more than 16V voltage to the switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2.7V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 50μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. In the case of dual power supplies, you should connect at least 2.7V.
DG9251EN-T1-E4 Features
8 Channels
50μA Supply Current
-3db Bandwidth: 314MHz
DG9251EN-T1-E4 Applications
There are a lot of Vishay Siliconix DG9251EN-T1-E4 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- DSLAMs
- Private Branch Exchange (PBX)
- DVD-R
- FTTH
- Sample-and-hold systems
- Channelized and Unchannelized DS3 applications
- Industrial control systems
- Fiber In The Loop (FITL)
- Cell phones
