DG9252EN-T1-E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN |
| Number of Pins | 16 |
| Weight | 57.09594mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 182Ohm |
| Max Power Dissipation | 525mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG9252 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Turn On Delay Time | 455 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 449MHz |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 136 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 182Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 45 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.2pF 6.6pF |
| On-state Resistance Match-Nom | 3.1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 250ns, 125ns |
| Charge Injection | 4.1pC |
| Channel-to-Channel Matching (ΔRon) | 3.1 Ω |
| Crosstalk | -67dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 369ns |
| Switch-off Time-Max | 131ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG9252EN-T1-E4 Overview
Due to its 16-WFQFN packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~125°C TA. Total terminations are 16. By its 4 channels, the electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. As part of its design, the 16 series is equipped with this electronic component. Multiplexers built on a SP4T switching circuit are built. This multiplexer is composed of 2 circuits. Using the DG9252 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 182Ohm. Datasheets for functions of 16 pins are available. In normalcircumstances, users should not exceed 16V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended to use 2.7V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. If you are using a dual power supply, you should attach at least 2.7V. In 449MHz-bandwidths, data can be transferred.
DG9252EN-T1-E4 Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
Bandwidth: 449MHz
DG9252EN-T1-E4 Applications
There are a lot of Vishay Siliconix DG9252EN-T1-E4 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Communication systems
- DSLAMs
- Modems
- PBX interfaces
- Channelized and Unchannelized DS3 applications
- Remote wireless modules
- Audio/video switches
- Public switching systems
- Industrial
