Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC |
Weight |
540.001716mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2013 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
60Ohm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Max Power Dissipation |
400mW |
Base Part Number |
DG9262 |
Number of Outputs |
2 |
Number of Channels |
2 |
Number of Circuits |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
1μA |
Power Dissipation |
400mW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
75 ns |
Number of Inputs |
2 |
Supply Type |
Single |
Turn-Off Delay Time |
50 ns |
On-State Resistance (Max) |
60Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
7pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
75ns, 50ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
400mOhm |
Crosstalk |
-90dB @ 1MHz |
Voltage - Supply, Single (V+) |
2.7V~12V |
Height |
1.55mm |
Length |
5mm |
Width |
4mm |
RoHS Status |
ROHS3 Compliant |
DG9262DY-E3 Overview
This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. By its 2 channels, the electronic component provides high-quality output. Unlike digital switches, these are based on SPST - NC switching circuits. The multiplexer consists of 2 circuits. Search with DG9262 if you are looking for analog multiplexer variants. There is 60Ohm internal resistance in this digital multiplexer. For details about the functions of 8 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 12V. Digital switch that provides Single power at a cost-effective price. A low voltage of 2.7V should be applied to the electronic component. For this digital switch to work, 1μA current would suffice. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~12V. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. A 2 input needs to be operated. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer. An output of 2 is provided by the digital multiplexer. There is a 8-SOIC package offered by suppliers.
DG9262DY-E3 Features
2 Channels
Switch Circuit: SPST - NC
1μA Supply Current
DG9262DY-E3 Applications
There are a lot of Vishay Siliconix DG9262DY-E3 Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Video switching
- Industrial and process control systems
- Relay Replacement
- High reliability control systems
- E1 Multiplexer
- PBX interfaces
- Precision data acquisition
- PDH Multiplexers
- Battery-powered systems