DG9422DV-T1-E3

45ns, 47ns SPST - NO 3Ohm Analog Switches DG9422 6 Pins 1nA SOT-23-6 Thin, TSOT-23-6

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG9422DV-T1-E3
Package: SOT-23-6 Thin, TSOT-23-6
Datasheet: PDF
Stock: 326
Description: 45ns, 47ns SPST - NO 3Ohm Analog Switches DG9422 6 Pins 1nA SOT-23-6 Thin, TSOT-23-6(Kg)

Details

Tags

Parameters
Throw Configuration	SPST
Turn On Delay Time	45 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~6V
Supply Type	Dual, Single
Turn-Off Delay Time	47 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	3Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	31pF 30pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	45ns, 47ns
Charge Injection	43pC
Drain to Source Resistance	3Ohm
Height	1mm
Length	3.05mm
Width	1.65mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6 Thin, TSOT-23-6
Number of Pins	6
Weight	19.986414mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2016
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	3Ohm
Max Power Dissipation	570mW
Base Part Number	DG9422
Pin Count	6
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	-1μA
Nominal Supply Current	20nA
Power Dissipation	570mW
Max Supply Current	1μA

DG9422DV-T1-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6 Thin, TSOT-23-6. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. An electrical component of this type can be found in the 6 series. Unlike digital switches, these are based on SPST - NO switching circuits. Search with DG9422 if you are looking for analog multiplexer variants. This digital multiplexer has 3Ohm internal resistance. For functions related to 6 pins, please refer to the datasheets. Users should never supply a voltage higher than 12V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2.7V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with -1μA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIt is recommended that you attach at least 2.7V to your dual power supply. Among the inputs that can be operated are the 1 inputs. The Drain to Source resistance of this electronic component is 3Ohm.