DG9424DQ-T1-E3

51ns, 35ns SPST - NO 3Ohm Analog Switches BREAK-BEFORE-MAKE DG9424 1nA 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG9424DQ-T1-E3
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 630
Description: 51ns, 35ns SPST - NO 3Ohm Analog Switches BREAK-BEFORE-MAKE DG9424 1nA 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2008
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	1.8Ohm
Additional Feature	ALSO OPERATES WITH 2.7V TO 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	BICMOS
Terminal Form	GULL WING
Number of Functions	4
Terminal Pitch	0.635mm
Base Part Number	DG9424
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Analog IC - Other Type	DPDT
Operating Supply Current	5μA
Nominal Supply Current	20nA
Power Dissipation	450mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	57 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	3V~16V ±3V~8V
Supply Type	Dual, Single
Turn-Off Delay Time	42 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	3Ohm
Min Dual Supply Voltage	3V
High Level Output Current	100mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	56 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	49pF 37pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	51ns, 35ns
Charge Injection	38pC
Crosstalk	-77dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	65ns
Drain to Source Resistance	1.7Ohm
Normal Position	NO
Height	920μm
Length	5.08mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG9424DQ-T1-E3 Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~85°C TA extended. 16 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching with DG9424 if you're looking for variants. It has an internal resistance of 1.8Ohm. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. 2.7V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 5μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. A dual power supply should have at least 3V voltage attached. There is an analog IC DPDT integrated with this board. There are 4 inputs to be operated. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATES WITH 2.7V TO 12V SINGLE SUPPLY. This electronic component presents a Drain to Source resistance of 1.7Ohm.

DG9424DQ-T1-E3 Features

1 Channels
Switch Circuit: SPST - NO
5μA Supply Current
Additional Features: ALSO OPERATES WITH 2.7V TO 12V SINGLE SUPPLY
Drain-to-Source resistance: 1.7Ohm