banner_page

DG9431DY

75ns, 50ns SPDT 30Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 8 Pins 100pA 3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Vishay Siliconix
  • Nocochips NO: 880-DG9431DY
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 771
  • Description: 75ns, 50ns SPDT 30Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 8 Pins 100pA 3V 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Number of Outputs 2
Qualification Status Not Qualified
Power Supplies 3/5V
Number of Channels 1
Max Supply Voltage 12V
Min Supply Voltage 2.7V
Power Dissipation 400mW
Max Supply Current 1μA
Turn On Delay Time 75 ns
Number of Inputs 1
Supply Type Single
Turn-Off Delay Time 50 ns
On-State Resistance (Max) 30Ohm
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 74 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 7pF
On-state Resistance Match-Nom 0.4Ohm
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 75ns, 50ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 400m Ω
Switching BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+) 2.7V~5V
Height 1.55mm
Length 5mm
Width 4mm
RoHS Status Non-RoHS Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 540.001716mg
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Resistance 30Ohm
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Multiplexer or Switches
Max Power Dissipation 400mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 3V
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 8

DG9431DY Overview


The electrical component comes in 8-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~85°C TA. There are 8 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. There is an electrical component included in the 8 series. On the other hand, analog switches can be constructed using SPDT switching circuits. A 30Ohm internal resistance characterizes this multiplexer. Datasheets for 8 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. 2.7V is the lowest voltage the electrical component should receive. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~5V. A digital multiplexer may suffer damage if voltage is applied above 1μA. There are 1 inputs to be operated. An output of 2 is provided by the digital multiplexer.

DG9431DY Features


1 Channels
Switch Circuit: SPDT

DG9431DY Applications


There are a lot of Vishay Siliconix DG9431DY Analog Switches & Multiplexers ICs applications.

  • Private Branch Exchange (PBX)
  • ISDN NT1/TA
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • Automatic test equipment
  • Communication systems
  • Avionics and Military Systems
  • Relay Replacement
  • High-Voltage
  • RGB switches
  • Precision test equipment

Write a review

Note: HTML is not translated!
    Bad           Good