DG9431DY-T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 30Ohm |
| Terminal Finish | TIN LEAD |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 400mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 75 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 50 ns |
| On-State Resistance (Max) | 30Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 74 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 75ns, 50ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.7V~5V |
| Height | 1.55mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
DG9431DY-T1 Overview
This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. 8 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. A total of 8 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SPDT switching circuits. As far as internal resistance is concerned, it has 30Ohm. The datasheets for the 8 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 2.7V. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~5V. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Operating 1 inputs is required. The analog switch ics has 2 outputs.
DG9431DY-T1 Features
1 Channels
Switch Circuit: SPDT
DG9431DY-T1 Applications
There are a lot of Vishay Siliconix DG9431DY-T1 Analog Switches & Multiplexers ICs applications.
- Medical systems
- Switching Systems
- Intelligent PBX
- Automotive applications
- Isolation
- SDH
- FTTH
- Sample hold systems
- Audio and video switching
- Avionics test equipment
