Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Number of Pins |
8 |
Supplier Device Package |
8-MSOP |
Weight |
139.989945mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2016 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
60Ohm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Max Power Dissipation |
320mW |
Base Part Number |
DG9433 |
Number of Outputs |
2 |
Number of Channels |
2 |
Number of Circuits |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
1μA |
Power Dissipation |
320mW |
Max Supply Current |
-1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
35 ns |
Number of Inputs |
2 |
Supply Type |
Single |
Turn-Off Delay Time |
18 ns |
On-State Resistance (Max) |
30Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
7.5pF 7.8pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
35ns, 18ns |
Charge Injection |
0.36pC |
Channel-to-Channel Matching (ΔRon) |
300mOhm |
Crosstalk |
-96dB @ 1MHz |
Voltage - Supply, Single (V+) |
2.7V~12V |
Height |
850μm |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
DG9433DQ-T1-E3 Overview
The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. The electronic part provides high-quality output because it has 2 channels. On the other hand, analog switches can be constructed using SPST - NO switching circuits. The circuits in this analogue multiplexer number 2. Search with DG9433 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 60Ohm. For functions related to 8 pins, please refer to the datasheets. A voltage higher than 12V should not normally be supplied to the switches. The digital multiplexer has a low cost Single supply. A low voltage of 2.7V should be applied to the electronic component. In order to operate this switch device, it would need a current of 1μA. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~12V. If put voltage greater than -1μA on the device, damage may be caused to the analogue multiplexer. The 2 inputs need to be operated in order to work. Temperatures over 85°C should not be allowed for the multiplexer to operate. In this digital multiplexer, there are 2 outputs. Suppliers offer 8-MSOP packages.
DG9433DQ-T1-E3 Features
2 Channels
Switch Circuit: SPST - NO
1μA Supply Current
DG9433DQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG9433DQ-T1-E3 Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Multi-Line E1 Interface Cards
- Digital cross connects (DSX-1)
- Frame Relay Equipment
- Sample-and-hold systems
- PBX interfaces
- Remote wireless modules
- Relay replacements
- E1 Multiplexer
- DSUs