DG9433DS-T1-E3

35ns, 18ns SPST - NO 30Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG9433 8 Pins 1nA 3V SOT-23-8

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG9433DS-T1-E3
Package: SOT-23-8
Datasheet: PDF
Stock: 200
Description: 35ns, 18ns SPST - NO 30Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG9433 8 Pins 1nA 3V SOT-23-8(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-8
Number of Pins	8
Weight	40.001177mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	60Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	515mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	10
Base Part Number	DG9433
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Max Supply Current	-1μA
Throw Configuration	SPST
Turn On Delay Time	35 ns
Supply Type	Single
Turn-Off Delay Time	18 ns
On-State Resistance (Max)	30Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	77 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	7.5pF 7.8pF
On-state Resistance Match-Nom	0.4Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	35ns, 18ns
Charge Injection	0.36pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-96dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	100ns
Voltage - Supply, Single (V+)	2.7V~12V
Height	1.2mm
Length	2.9mm
Width	1.65mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG9433DS-T1-E3 Overview

Shipping overseas is convenient with the electronic component packed in SOT-23-8. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 8. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 8 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. A total of 2 circuits make up this switch device. Try searching for DG9433 variants of the analog switch ic. In this multiplexer, the internal resistance is 60Ohm. For details about the functions of 8 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. An effective Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.7V. 1μA current would be enough for this multiplexer to operate. A voltage of 2.7V~12V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than -1μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.