DG9434DQ-T1-E3

35ns, 18ns SPST - NO/NC 30Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG9434 8 Pins 1nA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG9434DQ-T1-E3
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 645
Description: 35ns, 18ns SPST - NO/NC 30Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG9434 8 Pins 1nA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Inquiry Now

Details

Tags

Parameters
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	7.5pF 7.8pF
On-state Resistance Match-Nom	0.4Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	35ns, 18ns
Charge Injection	0.36pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-96dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	100ns
Voltage - Supply, Single (V+)	2.7V~12V
Height	850μm
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Weight	139.989945mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	60Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	320mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG9434
Output	SEPARATE OUTPUT
Pin Count	8
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Power Dissipation	320mW
Max Supply Current	-1μA
Throw Configuration	SPST
Turn On Delay Time	35 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	18 ns
On-State Resistance (Max)	30Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	77 dB

DG9434DQ-T1-E3 Overview

This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. In total, there have been 8 terminations. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. A total of 8 pins are injected into the body of the electronic part. The analog switch ics are built using SPST - NO/NC switching circuits. Using the DG9434 search parameter, you can discover variants of the switch. There is 60Ohm internal resistance in this digital multiplexer. The datasheets for the 8 pins explain the functions. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 2.7V should be applied to the electronic component. In order to operate this switch device, it would need a current of 1μA. Analogue multiplexers require a 2.7V~12V voltage to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than -1μA. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. A 2 input needs to be operated.