Parameters |
Min Supply Voltage |
2.7V |
Power Dissipation |
400mW |
Max Supply Current |
1μA |
Turn On Delay Time |
75 ns |
Number of Inputs |
1 |
Supply Type |
Single |
Turn-Off Delay Time |
50 ns |
On-State Resistance (Max) |
60Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
74 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
7pF |
On-state Resistance Match-Nom |
0.4Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
75ns, 50ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
400m Ω |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
2.7V~5V |
Height |
1.55mm |
Length |
5mm |
Width |
4mm |
RoHS Status |
Non-RoHS Compliant |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
540.001716mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
60Ohm |
Terminal Finish |
TIN LEAD |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
400mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
3V |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
8 |
Number of Outputs |
2 |
Qualification Status |
Not Qualified |
Power Supplies |
3/5V |
Number of Channels |
1 |
Max Supply Voltage |
12V |
DG9461DY-T1 Overview
Packed in 8-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 8. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. It is part of the design of the 8 series that this electronic component is included. On the other hand, analog switches can be constructed using SPDT switching circuits. It has an internal resistance of 60Ohm. Please refer to the datasheets for 8 pins functions. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 12V. A cost-effective Single supply type analogue multiplexer. There should be 2.7V voltage fed to the electrical part below 2.7V. This analog switch requires a voltage of 2.7V~5V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. There are 1 inputs to be operated. This digital multiplexer has 2 outputs.
DG9461DY-T1 Features
1 Channels
Switch Circuit: SPDT
DG9461DY-T1 Applications
There are a lot of Vishay Siliconix DG9461DY-T1 Analog Switches & Multiplexers ICs applications.
- Battery-powered systems
- Channel Banks
- Precision data acquisition
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Audio and video signal routing
- Precision instrumentation
- Access Concentrators
- Public switching systems
- Power routing
- Audio/video switches