DGD2101MS8-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G8 |
| Input Type | Non-Inverting |
| Rise / Fall Time (Typ) | 70ns 35ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.6A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
DGD2101MS8-13 Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) represents the packaging method.2 drivers are incorporated for its configuration.Surface Mount is the way in which it is mounted.In the absence of a 10V~20V supply voltage, it can demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.For this device, the temperature range is -40°C~125°C TA.A type of Non-Inverting is used for input in this program.8 terminations constitute its foundation.In addition, it is specifically designed to operate with a supply voltage of 15V.In this case, HALF BRIDGE BASED MOSFET DRIVER serves as the interface IC.Ideally, the high-side voltage should not exceed 600V.
DGD2101MS8-13 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
High-side voltage - Max (Bootstrap) of 600V
DGD2101MS8-13 Applications
There are a lot of Diodes Incorporated DGD2101MS8-13 gate drivers applications.
- High-speed communications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Solar inverters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- 3-Phase Motor Inverter Driver
- Isolated Gate Driver Supplies
- Broadcast equipment
- Uninterruptible Power Supplies (UPS)
- Isolated Supplies for controller area network (CAN),
- Portable computers
