DLPA2000DYFFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-UFBGA, DSBGA |
| Number of Pins | 56 |
| Operating Temperature | -10°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 2.25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DLPA2000 |
| Number of Outputs | 3 |
| Max Output Current | 650mA |
| Max Supply Voltage | 6V |
| Output Current | 650mA |
| Max Output Voltage | 5.5V |
| Voltage - Output | 1.2V~5.5V |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 6V |
| Output Current per Channel | 600mA |
| Min Output Voltage | 1.2V |
| Internal Switch(s) | Yes |
| Dimming | SPI |
| Number of Segments | 3 |
| Switching Frequency | 2.25MHz |
| Multiplexed Display Capability | YES |
| Nominal Input Voltage (DC) | 3.6V |
| Height | 625μm |
| Length | 3.2mm |
| Width | 2.8mm |
| Thickness | 400μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DLPA2000DYFFR Overview
As a result of its 56-UFBGA, DSBGA package, it helps to save board space on the board. In this LED driver, there are 3 outputs.Surface Mount represents this mounting method.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.It is possible for the led driver ic to function normally at -10°C~85°C TA.Based on the frequency of 2.25MHz, it operates.In this case, it operates with terminations of 0.This LED driver is configured with a base of 56 pins.In total, it includes 3 segments.It's mounted on the way to Surface Mount.It's under the DLPA2000 base part number.6V is an acceptable voltage.The output voltage of this device is 1.2V~5.5V.Initially, it accepts a voltage of 2.7V.In the event that the maximum supply current is allowed, it reaches 6V.There is no current available to supply to the load.This electronic component can fully perform its functions when the switching frequency is kept at 2.25MHz.When operating with a 650mA output current, the LED driver delivers all the benefits.Voltages should not exceed 5.5V volts at the output.It maintains a voltage of 1.2V at its minimum output.
DLPA2000DYFFR Features
Available in the 56-UFBGA, DSBGA package
Operating temperature of -10°C~85°C TA
Frequency of 2.25MHz
Supply voltage of 3.6V
Switching frequency of 2.25MHz
DLPA2000DYFFR Applications
There are a lot of Texas Instruments DLPA2000DYFFR LED Driver ICs applications.
- High-end retail lighting
- LED backlight driver for LCD displays for portable equipment
- Museum lighting
- Stage Lighting and Signage
- Down lights
- Sports Facility Lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Linear fluorescent
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Panel lighting
