DM355SZCE216
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 337 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 337 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 216MHz |
| Pin Count | 337 |
| Operating Supply Voltage | 1.3V |
| Temperature Grade | OTHER |
| Interface | I2C, SPI, UART, USB |
| Number of I/O | 104 |
| RAM Size | 32kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Bit Size | 32 |
| Frequency (Max) | 216MHz |
| Data Bus Width | 16b |
| Core Architecture | ARM |
| Format | FIXED-POINT |
| Number of UART Channels | 3 |
| Number of Cores | 1 |
| Height | 900μm |
| Length | 13mm |
| Width | 13mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM355SZCE216 Overview
Its uses have 337 terminations.It is supplied with voltage by 1.3V.Pins are available on the 337 component.The configuration of the device includes 337 pins.In order for the device to operate at the frequency of 216MHz, it has been designed specifically.In order to mount it, it utiliSurface Mountes the Surface Mount method.This device falls into the subcategory of Digital Signal Processors based on its specific characteristics.A supply voltage of 1.3V is required for its operation.The 3 UART channels support asynchronous serial communication in which data formats and transmission speeds are configurable.MICROPROCESSOR CIRCUIT is used as the uPs/uCs/peripheral IC type.ARM-architecture is used in this processor core.The device is equipped with 104 I/Os.It is recommended that the operating temperature be lower than 85°C.0°C should be exceeded as the operating temperature.Its maximum frequency should be kept below 216MHz.A 1 core is included in it.
DM355SZCE216 Features
Operating supply voltage of 1.3V
MICROPROCESSOR CIRCUIT as uPs/uCs/Peripheral Ics
104 I/Os
1 cores
DM355SZCE216 Applications
There are a lot of Texas Instruments DM355SZCE216 DSP applications.
- Audio compression
- Instrument modeling
- TVs
- Audio signal
- Boats
- Automatic analysis system of EEG or ECG
- Processing system
- Biometrics
- Biomedical engineering
- Radio detection and rangin systems
