DM3725CBC100
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM37x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| ECCN Code | 3A001.A.3 |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.14V |
| Terminal Pitch | 0.5mm |
| Frequency | 1GHz |
| Base Part Number | DM3725 |
| Pin Count | 515 |
| Operating Supply Voltage | 1.8V |
| Interface | 1-Wire®, EBI/EMI, I²C, McBSP, McSPI, MMC/SD, UART, USB, USB OTG |
| Max Supply Voltage | 1.91V |
| Min Supply Voltage | 1.71V |
| Memory Size | 32kB |
| Speed | 1000 MHz |
| RAM Size | 64kB |
| Supply Current-Max | 37mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.80V |
| Number of UART Channels | 4 |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 384kB |
| Height | 950μm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 630μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DM3725CBC100 Overview
In the 515-VFBGA, FCBGA package, it is a type of electronic component.A packaging way of Tray is provided.Digital Media System-on-Chip (DMSoC) members are well suited for a wide range of applications.The device is attached in a way that faces Surface Mount.Operating at the temperature of 0°C~90°C TJ ensures its normal operation.Voltages can be input or output within 1.80V's analog voltage range.This digital signal processor is included into the TMS320DM37x, DaVinci? series.Its uses have 515 terminations.Using 1.14V as the supply voltage, it operates.There are 515 component pins.515 pins can be found in its configuration.By using its base part number of DM3725, many related parts can be identified.It is specifically designed to operate with the frequency of 1GHz.As a mounting method, it uses Surface Mount.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.Devices like this can be powered with as little as 1.71V volts.A maximum voltage of 1.91V can be provided to this device.The device operates on a voltage of 1.8V as its supply voltage.32kB data can be stored in the memory of this device.In 4 UART channels, the data format and transmission speeds may be customi4ed for asynchronous serial communication.It is based on the ARM architecture.
DM3725CBC100 Features
Supplied in the 515-VFBGA, FCBGA package
Operating supply voltage of 1.8V
DM3725CBC100 Applications
There are a lot of Texas Instruments DM3725CBC100 DSP applications.
- Boats
- 3D tomography and imaging processing
- Signal processing for telecommunications
- Audio signal
- House construction
- Geoscience signal processing
- Digital camera
- Finite impulse response digital filters
- Vehicle electronics
- Receivers
