DM3725CBP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 515-WFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM37x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| ECCN Code | 5A992.C |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.14V |
| Frequency | 800MHz |
| Base Part Number | DM3725 |
| Pin Count | 515 |
| Operating Supply Voltage | 1.8V |
| Interface | 1-Wire®, EBI/EMI, I²C, McBSP, McSPI, MMC/SD, UART, USB, USB OTG |
| Max Supply Voltage | 1.91V |
| Min Supply Voltage | 1.71V |
| Memory Size | 32kB |
| RAM Size | 64kB |
| Supply Current-Max | 37mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.80V |
| Number of UART Channels | 4 |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 384kB |
| Height | 700μm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 500μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DM3725CBP Overview
This is an electronic component with a 515-WFBGA, FCBGA package.It is provided with a packaging way of Tray.The fact that it belongs to the Digital Media System-on-Chip (DMSoC) family means that it can be applied to a wide range of applications.Surface Mount is the direction in which it is mounted.By operating the device at the temperature of 0°C~90°C TJ, a normal operation is ensured.1.80V refers to the range of analog voltages that can be input or output.The TMS320DM37x, DaVinci? series incorporates this digital signal processor.The use of it is terminated by 515.Using 1.14V as the supply voltage, it operates.There are pins on the 515 component.515 pins can be found in its configuration.Several related parts can be identified using its base part number, DM3725.In order for the device to operate at 800MHz frequency, there is a specific design.As a mounting method, it uses Surface Mount.This device falls into the subcategory of Digital Signal Processors based on its specific characteristics.In this device, the minimum voltage is 1.71V.This device can handle a maximum voltage of 1.91V.This device is powered by a voltage of 1.8V.Using this device, you can store 32kB data.It is possible to configure the data format and transfer speed of 4 UART channels for synchronous serial communication.ARM-architecture is used in this processor core.
DM3725CBP Features
Supplied in the 515-WFBGA, FCBGA package
Operating supply voltage of 1.8V
DM3725CBP Applications
There are a lot of Texas Instruments DM3725CBP DSP applications.
- Image signal processing
- Automobiles
- Sound navigation and ranging systems
- Automobile electronic gadgets
- TVs
- Computer vision technology
- Encoding/broadcast
- Radio detection and rangin systems
- Finite impulse response digital filters
- Smart camera
