DM3725CBPD100
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 515-WFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM37x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| ECCN Code | 5A992.C |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.14V |
| Frequency | 1GHz |
| Base Part Number | DM3725 |
| Pin Count | 515 |
| Operating Supply Voltage | 1.8V |
| Power Supplies | 1.23.3V |
| Interface | 1-Wire®, EBI/EMI, I²C, McBSP, McSPI, MMC/SD, UART, USB, USB OTG |
| Max Supply Voltage | 1.91V |
| Min Supply Voltage | 1.71V |
| Memory Size | 32kB |
| Number of I/O | 188 |
| Speed | 1000 MHz |
| RAM Size | 64kB |
| Memory Type | FLASH |
| Supply Current-Max | 37mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.80V |
| Number of UART Channels | 4 |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 384kB |
| Height | 700μm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 500μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DM3725CBPD100 Overview
In electronic terms, it is a type of component that comes in the package of type 515-WFBGA, FCBGA .It is provided with a packaging way of Tray.Due to its membership in Digital Media System-on-Chip (DMSoC), it is ideally suited for a wide range of uses.It is mounted in the direction of Surface Mount as shown in the image below.If it is operating at the temperature of -40°C~90°C TJ, then it will be operating normally.As the name implies, the analog voltage range of 1.80V refers to the voltage that can be inserted or removed.This digital signal processor is included into the TMS320DM37x, DaVinci? series.The 515 terminations are used for its uses.It is supplied with voltage by 1.14V.Pins are available for 515 components.In its configuration, it contains 515 pins.Based on its base part number of DM3725, many ralated parts can be found.To operate at 1GHz frequency, the device has a specific design.Surface Mount is the method of mounting it.This device can be classified into the subcategory Digital Signal Processors based on its specific characteristics.1.71V is the minimum voltage that can be supplied to this device.The maximum voltage for this device is 1.91V.A voltage of 1.8V is used as the supply voltage.Its memory is capable of storing 32kB data.Electricity is provided by 1.23.3V.Data formats and transmission speeds are configurable for 4 UART channels used for asynchronous serial communication.The architecture of this processor core is ARM.It is equipped with 188 I/Os.The memory type adopted by it is FLASH.
DM3725CBPD100 Features
Supplied in the 515-WFBGA, FCBGA package
Operating supply voltage of 1.8V
188 I/Os
DM3725CBPD100 Applications
There are a lot of Texas Instruments DM3725CBPD100 DSP applications.
- House construction
- Automobile electronic gadgets
- Speech processing and recognition
- Remote sensing image processing technology
- Compression of videos
- Audio signal
- Biomedical engineering
- Scene analysis technology
- TVs
- Streaming music
