DM3725CUS
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 423-LFBGA, FCBGA |
| Number of Pins | 423 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM37x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 423 |
| ECCN Code | 5A992.C |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.14V |
| Terminal Pitch | 0.65mm |
| Frequency | 800MHz |
| Base Part Number | DM3725 |
| Pin Count | 423 |
| Operating Supply Voltage | 1.8V |
| Interface | 1-Wire®, EBI/EMI, I²C, McBSP, McSPI, MMC/SD, UART, USB, USB OTG |
| Max Supply Voltage | 1.91V |
| Min Supply Voltage | 1.71V |
| Memory Size | 64kB |
| Nominal Supply Current | 60mA |
| RAM Size | 256kB |
| Memory Type | Cache |
| Bit Size | 32 |
| Data Bus Width | 8b |
| Number of Timers/Counters | 16 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.80V |
| Number of UART Channels | 4 |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 384kB |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 960μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DM3725CUS Overview
Basically, it is a type of electronic component that is available in a 423-LFBGA, FCBGA package.The packaging way is Tray.With its association with Digital Media System-on-Chip (DMSoC), it is suitable for a wide range of applications.Surface Mount is mounted in a manner that allows it to be moved.By operating the device at the temperature of 0°C~90°C TJ, a normal operation is ensured.As the name implies, the analog voltage range of 1.80V refers to the voltage that can be inserted or removed.As part of the TMS320DM37x, DaVinci? series, this digital signal processor is included.The use of it is terminated by 423.The supply voltage is 1.14V.In this component, there are pins for 423.An overview of its configuration can be found in the section on 423 pins.With its base part number of DM3725, many related parts can be identified.In order for the device to operate at 800MHz frequency, there is a specific design.Mounting is accomplished using Surface Mount.This device can be classified into the subcategory Digital Signal Processors based on its specific characteristics.This device operates at a voltage as low as 1.71V.There is a maximum voltage supply of 1.91V to this device.The device operates on a voltage of 1.8V as its supply voltage.It can store 64kB data in its memory.4 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.Timer/counters for measuring and counting external events are called 16 timers or counters.The processor core uses the architecture of the ARM processor.As far as memory type is concerned, it uses Cache.
DM3725CUS Features
Supplied in the 423-LFBGA, FCBGA package
Operating supply voltage of 1.8V
16 timers/counters
DM3725CUS Applications
There are a lot of Texas Instruments DM3725CUS DSP applications.
- Infinite impulse response filters
- Automatic analysis system of EEG or ECG
- Digital image processing, data compression
- Digital camera
- Geoscience signal processing
- Machinery and equipment
- Financial signals
- Biomedical treatment
- Audio compression
- Monitoring equipment
