DM3730CBC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM37x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| ECCN Code | 5A992.C |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.14V |
| Terminal Pitch | 0.5mm |
| Frequency | 800MHz |
| Base Part Number | DM3730 |
| Pin Count | 515 |
| Operating Supply Voltage | 1.8V |
| Interface | 1-Wire®, EBI/EMI, I²C, McBSP, McSPI, MMC/SD, UART, USB, USB OTG |
| Max Supply Voltage | 1.91V |
| Min Supply Voltage | 1.71V |
| Memory Size | 320kB |
| RAM Size | 64kB |
| Memory Type | FLASH, RAM, ROM |
| Supply Current-Max | 37mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 12 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.80V |
| Number of UART Channels | 4 |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 384kB |
| Height | 950μm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 630μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DM3730CBC Overview
In the 515-VFBGA, FCBGA package, it is a type of electronic component.Packaging is provided in the form of Tray.Digital Media System-on-Chip (DMSoC)'s wide range of applications makes it ideal for a wide variety of applications.It is mounted in the direction of Surface Mount as shown in the image below.By operating the device at the temperature of 0°C~90°C TJ, a normal operation is ensured.Voltages can be input or output within 1.80V's analog voltage range.The TMS320DM37x, DaVinci? series incorporates this digital signal processor.In terms of its uses, it has 515 terminations.The supply voltage is 1.14V.515 components have pins.The configuration of this board includes 515 pins.The base part number DM3730 can be used to identify many associated parts.To operate at 800MHz frequency, the device has a specific design.The mounting method is Surface Mount.This device falls into the subcategory of Digital Signal Processors based on its specific characteristics.This device requires a minimum voltage of 1.71V.This device can handle a maximum voltage of 1.91V.In order for it to operate, 1.8V is the supply voltage.It can store 320kB data in its memory.The 4 UART channels are configured to support asynchronous serial transmissions of data in a format and speed that can be configured.Time and external events are measured and counted with 12 timers/counters.A ARM-architecture processor core is used here.Memory type FLASH, RAM, ROM is used by it.
DM3730CBC Features
Supplied in the 515-VFBGA, FCBGA package
Operating supply voltage of 1.8V
12 timers/counters
DM3730CBC Applications
There are a lot of Texas Instruments DM3730CBC DSP applications.
- Seismology
- Audio
- Computers and laptop
- Speech processing
- Geophysical processing
- Automatic analysis system of EEG or ECG
- Smart camera
- Financial signals
- Airplanes
- Video coding, audio coding
