DM3730CBC100
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM37x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| ECCN Code | 5A992.C |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.14V |
| Terminal Pitch | 0.5mm |
| Frequency | 1GHz |
| Base Part Number | DM3730 |
| Pin Count | 515 |
| Operating Supply Voltage | 1.8V |
| Interface | 1-Wire®, EBI/EMI, I²C, McBSP, McSPI, MMC/SD, UART, USB, USB OTG |
| Max Supply Voltage | 1.91V |
| Min Supply Voltage | 1.71V |
| Memory Size | 32kB |
| Speed | 1000 MHz |
| RAM Size | 64kB |
| Supply Current-Max | 37mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.80V |
| Number of UART Channels | 4 |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 384kB |
| Height | 950μm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 630μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DM3730CBC100 Overview
In electronic terms, it is a type of component that comes in the package of type 515-VFBGA, FCBGA .There is a packaging method of Tray provided with it.The Digital Media System-on-Chip (DMSoC) family provides a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.Operating at the temperature of 0°C~90°C TJ ensures its normal operation.It refers to the analog voltage range of 1.80V that may be input or output.It is a part of the TMS320DM37x, DaVinci? series of digital signal processors.The 515 terminations are used for its uses.The voltage supplied by 1.14V is used to operate it.Pins are located on the 515 component.In its configuration, it contains 515 pins.Based on its base part number of DM3730, many ralated parts can be found.In order for the device to operate at 1GHz frequency, there is a specific design.Using Surface Mount as a mounting method, it is mounted.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.In order to power this device, a voltage as low as 1.71V needs to be supplied.The maximum voltage for this device is 1.91V.A voltage of 1.8V is used as the supply voltage.Data can be stored in this device's memory in 32kB format.Data formats and transmission speeds are configurable for 4 UART channels used for asynchronous serial communication.The architecture of this processor core is ARM.
DM3730CBC100 Features
Supplied in the 515-VFBGA, FCBGA package
Operating supply voltage of 1.8V
DM3730CBC100 Applications
There are a lot of Texas Instruments DM3730CBC100 DSP applications.
- Speech signal processing
- Fourier transform
- Image signal processing
- Instrument modeling
- Digital camera
- Vibration signal processing
- Scene analysis technology
- Compression of videos
- Control systems
- TVs
