DM3730CBP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 515-WFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM37x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.14V |
| Frequency | 1GHz |
| Base Part Number | DM3730 |
| Pin Count | 515 |
| Interface | 1-Wire®, EBI/EMI, I²C, McBSP, McSPI, MMC/SD, UART, USB, USB OTG |
| Max Supply Voltage | 1.2V |
| Min Supply Voltage | 1.71V |
| Memory Size | 32kB |
| Number of I/O | 188 |
| Speed | 800 MHz |
| RAM Size | 64kB |
| Number of Bits | 32 |
| Supply Current-Max | 37mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 12 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.80V |
| Number of UART Channels | 4 |
| Number of Cores | 2 |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 384kB |
| Clock Rate | 800MHz |
| Height | 700μm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 500μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DM3730CBP Overview
An electronic component available in package 515-WFBGA, FCBGA.Tray packaging is provided for it.The fact that it belongs to the Digital Media System-on-Chip (DMSoC) family means that it can be applied to a wide range of applications.The device is attached in a way that faces Surface Mount.If it is operating at the temperature of 0°C~90°C TJ, then it will be operating normally.The analog voltage range of 1.80V refers to the input or output voltage.TMS320DM37x, DaVinci? series digital signal processors contain this digital signal processor.In order to use it, it has 515 terminations.Using 1.14V as the supply voltage, it operates.515 components have pins.In its configuration, 515 pins can be found.The base part number DM3730 allows identification of a wide range of related parts.In order for the device to operate at 1GHz frequency, there is a specific design.Surface Mount is the method of mounting it.This device falls into the subcategory of Digital Signal Processors based on its specific characteristics.This device requires a minimum voltage of 1.71V.Devices like this can be powered by voltages up to 1.2V.Its memory can be used to store 32kB data.It is possible to configure the data format and transfer speed of 4 UART channels for synchronous serial communication.Counting external events and measuring time are done by 12 timers/counters.The architecture of this processor core is ARM.188 I/Os are included with the device.The device stores 32 pieces of information.2 cores are included.
DM3730CBP Features
Supplied in the 515-WFBGA, FCBGA package
12 timers/counters
188 I/Os
2 cores
DM3730CBP Applications
There are a lot of Texas Instruments DM3730CBP DSP applications.
- Automobile electronic gadgets
- Sonar
- Signal processing for telecommunications
- Consumer electronic gadgets
- Streaming music
- Biometrics
- Speech processing
- Image signal processing
- MP3 audio player
- Finite impulse response digital filters
