DM3730CBP100
| Parameters | |
|---|---|
| Data Bus Width | 32b |
| Number of Timers/Counters | 12 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.80V |
| Number of UART Channels | 4 |
| Number of Cores | 2 |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 384kB |
| Height | 700μm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 500μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 515-WFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM37x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.14V |
| Frequency | 1GHz |
| Base Part Number | DM3730 |
| Pin Count | 515 |
| Interface | 1-Wire®, EBI/EMI, I²C, McBSP, McSPI, MMC/SD, UART, USB, USB OTG |
| Max Supply Voltage | 1.2V |
| Min Supply Voltage | 1.71V |
| Memory Size | 32kB |
| Number of I/O | 188 |
| Speed | 1000 MHz |
| RAM Size | 64kB |
| Number of Bits | 32 |
| Supply Current-Max | 37mA |
| Bit Size | 32 |
DM3730CBP100 Overview
This is an electronic component with a 515-WFBGA, FCBGA package.Tray is the packaging method provided.Its Digital Media System-on-Chip (DMSoC) status makes it ideal for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.As long as it is operated at the temperature of 0°C~90°C TJ, it will operate normally.This refers to the analog voltage range that can be input or output from 1.80V.The TMS320DM37x, DaVinci? series contains this digital signal processor.In order to use it, it has 515 terminations.It operates with the supply voltage of 1.14V.Pins are located on the 515 component.The configuration of this board includes 515 pins.By using its base part number of DM3730, many related parts can be identified.Specifically, the device is designed to operate at a frequency of 1GHz.Using Surface Mount as a mounting method, it is mounted.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.In this device, the minimum voltage is 1.71V.This device can be powered by 1.2V voltages.In its memory, this device can store 32kB data.The 4 UART channels are configured to support asynchronous serial transmissions of data in a format and speed that can be configured.External events are tracked and measured with 12 timers/counters.ARM architecture is used for this processor core.Device features 188 I/Os.On the device, there is 32 information.2 cores are present in it.
DM3730CBP100 Features
Supplied in the 515-WFBGA, FCBGA package
12 timers/counters
188 I/Os
2 cores
DM3730CBP100 Applications
There are a lot of Texas Instruments DM3730CBP100 DSP applications.
- 3D tomography and imaging processing
- Image compression
- Digital image processing, data compression
- Streaming music
- Processing system
- Smart phones
- Computers and laptop
- Computer vision technology
- Electronic information engineering
- Vehicle electronics
