DM3730CBPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 515-WFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | TMS320DM37x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.14V |
| Frequency | 100MHz |
| Base Part Number | DM3730 |
| Pin Count | 515 |
| Operating Supply Voltage | 1.8V |
| Interface | 1-Wire®, EBI/EMI, I²C, McBSP, McSPI, MMC/SD, UART, USB, USB OTG |
| Max Supply Voltage | 1.91V |
| Min Supply Voltage | 1.71V |
| Memory Size | 32kB |
| Speed | 800 MHz |
| RAM Size | 64kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 12 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.80V |
| Number of UART Channels | 4 |
| Number of Cores | 2 |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 384kB |
| Clock Rate | 800MHz |
| Height | 700μm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 500μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DM3730CBPA Overview
Basically, it is a type of electronic component that is available in a 515-WFBGA, FCBGA package.Packaging method Tray is provided.The fact that it belongs to the Digital Media System-on-Chip (DMSoC) family means that it can be applied to a wide range of applications.It is mounted in the way of Surface Mount.If it is operating at the temperature of -40°C~105°C TJ, then it will be operating normally.It refers to the analog voltage range of 1.80V that may be input or output.This digital signal processor is part of the TMS320DM37x, DaVinci? series.The uses of this product can be terminated with 515.1.14V provides the supply voltage for it.In this component, there are pins for 515.An overview of its configuration can be found in the section on 515 pins.It is possible to identify numerous related parts using the base part number DM3730.The device is specifically designed to operate at the frequency of 100MHz.As a mounting method, it uses Surface Mount.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.Devices like this can be powered with as little as 1.71V volts.The maximum voltage for this device is 1.91V.In order for it to operate, 1.8V is the supply voltage.32kB data can be stored in the memory of this device.The 4 UART channels support asynchronous serial communication in which data formats and transmission speeds are configurable.Counting external events and measuring time are done by 12 timers/counters.This processor core adopts the architecture of ARM.2 cores are included.
DM3730CBPA Features
Supplied in the 515-WFBGA, FCBGA package
Operating supply voltage of 1.8V
12 timers/counters
2 cores
DM3730CBPA Applications
There are a lot of Texas Instruments DM3730CBPA DSP applications.
- Radar
- Audio synthesis
- Video coding, audio coding
- Voice recognition
- Fourier transform
- Computer vision technology
- Computers and laptop
- Encoding/broadcast
- Control systems
- Digital camera
