DM3730CUSA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 423-LFBGA, FCBGA |
| Number of Pins | 423 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | TMS320DM37x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 423 |
| ECCN Code | 5A992.C |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.14V |
| Terminal Pitch | 0.65mm |
| Frequency | 800MHz |
| Base Part Number | DM3730 |
| Pin Count | 423 |
| Operating Supply Voltage | 1.8V |
| Interface | 1-Wire®, EBI/EMI, I²C, McBSP, McSPI, MMC/SD, UART, USB, USB OTG |
| Max Supply Voltage | 1.91V |
| Min Supply Voltage | 1.71V |
| Memory Size | 32kB |
| Number of I/O | 188 |
| RAM Size | 64kB |
| Memory Type | DDR2, FLASH, NAND, SDRAM, SRAM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 16 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.80V |
| Number of UART Channels | 4 |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 384kB |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 960μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DM3730CUSA Overview
This is an electronic component with a 423-LFBGA, FCBGA package.Packaging is provided in the form of Tray.Digital Media System-on-Chip (DMSoC) members are well suited for a wide range of applications.The machine is mounted in the way of Surface Mount in order to facilitate its operation.By operating the device at the temperature of -40°C~105°C TJ, a normal operation is ensured.Voltages can be input or output within 1.80V's analog voltage range.There are several digital signal processors in the TMS320DM37x, DaVinci? series, including this one.The uses of this product can be terminated with 423.It operates with the supply voltage of 1.14V.Pins are available for 423 components.Its configuration includes 423 pins.Several related parts can be identified using its base part number, DM3730.The device is specifically designed to operate at the frequency of 800MHz.Surface Mount is used as the mounting method.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.The minimum voltage supplied to this device is as low as 1.71V.This device can be powered by 1.91V voltages.A supply voltage of 1.8V is required for its operation.There is a memory on this device that can store 32kB data.It is possible to configure the data format and transfer speed of 4 UART channels for synchronous serial communication.16 timers/counters are used to measure time and count external events.Using ARM architecture, this processor core operates.188 I/Os are available on the device.The memory type adopted by it is DDR2, FLASH, NAND, SDRAM, SRAM.
DM3730CUSA Features
Supplied in the 423-LFBGA, FCBGA package
Operating supply voltage of 1.8V
16 timers/counters
188 I/Os
DM3730CUSA Applications
There are a lot of Texas Instruments DM3730CUSA DSP applications.
- Consumer electronic gadgets
- Signal processing for telecommunications
- Receivers
- Vibration signal processing
- Smart phones
- Radar
- Audio compression
- Spectral density estimation
- Infinite impulse response filters
- Radio detection and rangin systems
