DM74ALS109AN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 34MHz |
| Family | ALS |
| Current - Quiescent (Iq) | 4mA |
| Current - Output High, Low | 400μA 8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 18ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| fmax-Min | 34 MHz |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
DM74ALS109AN Overview
The item is packaged in 16-DIP (0.300, 7.62mm)cases. The package Tubecontains it. There is a Differentialoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at 0°C~70°C TA. It belongs to the type JK Typeof flip flops. In terms of FPGAs, it belongs to the 74ALS series. This D flip flop should not have a frequency greater than 34MHz. D latch consists of 2 elements. During its operation, it consumes 4mA quiescent energy. It has been determined that there have been 16 terminations. The power source is powered by 5V. This D flip flop belongs to the family of ALS. In this case, the maximum supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V.
DM74ALS109AN Features
Tube package
74ALS series
DM74ALS109AN Applications
There are a lot of Rochester Electronics, LLC DM74ALS109AN Flip Flops applications.
- Supports Live Insertion
- Synchronous counter
- Data storage
- Storage registers
- Latch
- Instrumentation
- ESD performance
- Safety Clamp
- Bus hold
- Asynchronous counter
