DM74ALS273N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 35MHz |
| Family | ALS |
| Current - Quiescent (Iq) | 20mA |
| Current - Output High, Low | 2.6mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 15ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| fmax-Min | 35 MHz |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
DM74ALS273N Overview
20-DIP (0.300, 7.62mm)is the packaging method. It is included in the package Tube. This output is configured with Non-Inverted. This trigger uses the value Positive Edge. Through Holeis in the way of this electric part. With a supply voltage of 4.5V~5.5V volts, it operates. It is at 0°C~70°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74ALS series. You should not exceed 35MHzin the output frequency of the device. A total of 1 elements are present. As a result, it consumes 20mA quiescent current and is not affected by external forces. Terminations are 20. Power is provided by a 5V supply. In this case, the D flip flop belongs to the ALSfamily. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be above 4.5V.
DM74ALS273N Features
Tube package
74ALS series
DM74ALS273N Applications
There are a lot of Rochester Electronics, LLC DM74ALS273N Flip Flops applications.
- High Performance Logic for test systems
- Instrumentation
- Dynamic threshold performance
- Buffer registers
- Circuit Design
- Power down protection
- Automotive
- Buffered Clock
- 2 – Bit synchronous counter
- Balanced 24 mA output drivers
