DM74ALS273SJ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Reach Compliance Code | compliant |
| Base Part Number | 74ALS273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 35MHz |
| Family | ALS |
| Current - Quiescent (Iq) | 20mA |
| Current - Output High, Low | 2.6mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 15ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| fmax-Min | 35 MHz |
| Width | 5.3mm |
DM74ALS273SJ Overview
It is embeded in 20-SOIC (0.209, 5.30mm Width) case. It is contained within the Tubepackage. T flip flop is configured with an output of Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. The operating temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74ALS series. A frequency of 35MHzshould not be exceeded by its output. A total of 1elements are contained within it. As a result, it consumes 20mA of quiescent current without being affected by external factors. Terminations are 20. The object belongs to the 74ALS273 family. It is powered by a voltage of 5V . Devices in the ALSfamily are electronic devices. Vsup reaches 5.5V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation.
DM74ALS273SJ Features
Tube package
74ALS series
DM74ALS273SJ Applications
There are a lot of ON Semiconductor DM74ALS273SJ Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Instrumentation
- Reduced system switching noise
- Frequency division
- Memory
- High Performance Logic for test systems
- Single Up Count-Control Line
- Communications
- Common Clocks
- Bounce elimination switch
