banner_page

DM74ALS373N

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS373 20-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-DM74ALS373N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 402
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS373 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Supplier Device Package 20-PDIP
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ALS
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination Through Hole
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ALS373
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 25mA
Output Current 24mA
Number of Bits 8
Propagation Delay 16 ns
Quiescent Current 16mA
Turn On Delay Time 2 ns
Logic Function D-Type, Latch
Number of Inputs 1
Current - Output High, Low 2.6mA 24mA
Logic Type D-Type Transparent Latch
Number of Gates 8
High Level Output Current -2.6mA
Low Level Output Current 2.6mA
Number of Input Lines 3
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 2ns
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

DM74ALS373N Overview


It is embedded in the 20-DIP (0.300, 7.62mm) package. A Tube package is used to package it. It uses the output configuration Tri-State. This electrical device has Logic type D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. The supply voltage of the device is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. 74ALS is the series number of this FPGA. The electronic part in this image has 8 bits. 74ALS373 is its family. The 20 pins are designed into it. The electronic part is mounted in a way that corresponds to Through Hole. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Its 24mA output current allows for maximum design flexibility. High efficiency requires a supply voltage of 5V. 3 output lines generate the binary equivalent of the input lines. The current consumed by the device is 16mA volts in quiescent mode, which cannot be affected by external factors. It consists of 1 elements. 8 circuits enable it to achieve high performance. 2.6mA is set as the low level output current. It is set to zero for the high level output current. The operating temperature should be lower than 70°C. Temperatures higher than 0°C should be used for operation. It supports a maximum supply voltage of 5.5V. A minimal voltage of 4.5V is needed to operate it.

DM74ALS373N Features


20-DIP (0.300, 7.62mm) package
74ALS series
8 Bits
74ALS373 family
20 pins
1 elements

DM74ALS373N Applications


There are a lot of ON Semiconductor DM74ALS373N Latches applications.

  • Buffer/Storage Registers
  • Parallel-to-Serial Data Conversion
  • Relay
  • Counter
  • Counters
  • Flip-flops
  • Stacked or Push-Down Registers
  • Hammer
  • Avionics
  • OC-48 communication systems

Write a review

Note: HTML is not translated!
    Bad           Good