DM74ALS373SJX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ALS373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 25mA |
| Number of Bits | 8 |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 2 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -2.6mA |
| Low Level Output Current | 2.6mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 2ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74ALS373SJX Overview
It is embedded in the 20-SOIC (0.209, 5.30mm Width) package. Packaged in the way of Tape & Reel (TR). There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. A temperature of 0°C~70°C is set as the operating temperature. It is a type of FPGA belonging to the 74ALS series. The design of this electronic part is based on 8 bits. There is no doubt that it belongs to the family 74ALS373. The pin configuration of the device is 20. Electronic parts are mounted using the Surface Mount method. An electronic circuit can be found on 3 input lines. Optimal efficiency requires 5V as the supply voltage. A binary equivalent of the input line is generated by the 3 output lines. This object is composed of 1 elements. In order to achieve its superior flexibility, 8 circuits are used. The low level output current is set to 2.6mA. -2.6mA is set as the high level output current. The operating temperature should be lower than 70°C. A temperature greater than 0°C should be used as the operating temperature. It is capable of providing a maximum supply voltage of 5.5V. In order for the machine to operate, the supply voltage must be 4.5V.
DM74ALS373SJX Features
20-SOIC (0.209, 5.30mm Width) package
74ALS series
8 Bits
74ALS373 family
20 pins
1 elements
DM74ALS373SJX Applications
There are a lot of ON Semiconductor DM74ALS373SJX Latches applications.
- Registers
- Shift left with parallel loading
- Hammer
- Double bus register system
- Pattern generators
- Avionics
- Stacked or Push-Down Registers
- Lamp and Display (LED)
- Frequency
- Display driver
